What is electrocoating?

Electrocoating is a process by which electrically charged particles are deposited out of a water suspension to coat a conductive part. During the electrocoat process, paint is applied to a part at a certain film thickness, which is regulated by the amount of voltage applied. //www.dcorian.com/articles/electrocoating

How can I coat aluminum?

A typical process for plating copper on aluminum is: Degrease. Soak clean. Thoroughly rinse. Dip in a 50 percent nitric acid solution. Depending on the aluminum alloy, sodium bifluoride, sulfuric acid or chromic acid may have to be used in conjunction with nitric acid. Thoroughly rinse. Dip in a zincate bath for 1 minute. (Proprietary zincate solutions are best.) Strip the zinc coating using 50 percent nitric acid Rinse thoroughly. Dip in the zincate solution again.* Rinse thoroughly. Apply a copper strike using a cyanide or non-cyanide alkaline strike bath. Rinse thoroughly. Plate in a copper plating bath. //www.dcorian.com/articles/copper-plating-on-aluminum-and-aluminum-alloys

How can I estimate the electrocoat usage of a part?

Electrocoat usage per part is usually determined by multiplying the square foot of a part by the ecoat usage per square foot. The square footage should be supplied by the part manufacturer. The ecoat usage per square foot can be determined by two different methods — average and theoretical. //www.dcorian.com/articles/estimating-the-electrocoat-usage-of-a-part

必威体育最新版本下载

关键阅读 | FAQ | 素普里叶指令

必威体育最新版本下载电容并称生态过程电荷粒子从水悬浮中沉入导波部分E-coat汽车工业常用

投影画系统

选择右传递器系统、涂层技术以及辅助设备

必威体育最新版本下载电容整理:基本阅读

安装生态线

必威体育最新版本下载思考电容能力投资George Lovel,Lippert涂料厂管理者,讨论你添加生态线时应记住的考量问题

编码系统最佳长期性能

必威bwei网址Axalta的Mikewisters表示, 防腐蚀和紫外线接触最优保护是电服和超耐用火药涂层

如何测量Ecoat投电场

Axalta的Dan Rose表示,定期监控、记录和绘制投电图可成为保证质量的极值工具

作者:时间EPA引导'真实世界'安全标准

请求华盛顿新政府带头并带回良好情理回规范过程

如何提高线密度

问题解析必威bwei网址端点店应用液化和粉末应用并加点电镀如何提高裁剪线密度,沉船专家Scott Rempala有答案

必威体育最新版本下载Latest电子通讯新闻更新 必威体育最新版本下载查看所有电子整理文章

回溯向前看

Seacolety化学专业CEOGreg Elliott访问明尼苏达企业杂志

sherwin-Williams21色预测

聚焦重播

必威体育最新版本下载查看所有电子整理文章

必威体育最新版本下载FAQ:电容

必威体育最新版本下载电容是什么

必威体育最新版本下载电容过程电荷粒子从悬浮水中沉入导波部分电服过程期间,涂料应用到一定薄厚度的部分上,受电压量约束

如何覆盖铝

铝上覆镀铜的典型过程如下:

失礼
稀疏净化
完全冲刷
浸入50%硝酸溶液视铝合金而定,二氟化钠、硫酸或铬酸可能不得不与硝酸并用
完全冲刷
水槽一分钟私有锌溶液最优
去除锌涂层使用50%硝酸
彻底冲刷
ip重出锌溶液
彻底冲刷
使用氰化物或非氰化物碱性电击
彻底冲刷
板铜打浴

//www.dcorian.com/articles/copper-plating-on-aluminum-and-aluminum-alloys

电服使用量如何估计

电服局部用法通常是乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法乘法平方块应该由零件制造厂商提供生态法每平方英尺可用两种不同方法确定-平均法和理论法

//www.dcorian.com/articles/estimating-the-electrocoat-usage-of-a-part